Tianhe Machinery's tablet press is here!
021-57740568
cabbo@tianhepm.com
Disassembly of single punch tablet press die
2021-11-29 09:29
The single-punch tablet press is a tablet press that only has one mold.
The single-punch tablet press is a tablet press that only has one mold.
Because it only has one mold, it is easy to replace the mold, so most customers use it for experimental trial production, and customize molds of various specifications for pressing tablets of different shapes.
The disassembly of the mold of the single-punch tablet press generally follows the principle of first disassembling the feeder, then disassembling the middle mold platen, and then disassembling the upper and lower punches.
When disassembling the feeder, remember to first remove the small hexagonal screw on the side of the feeder, and then remove the spring screw at the bottom.
The middle mold platen is fixed by two screws at the bottom of the platen, and the platen can be removed by unscrewing them.
The middle mold and the platen are fixed together. After the platen is removed, loosen the fixing screws of the middle mold to remove the middle mold.
The disassembly of the upper and lower punches is relatively simple. The lower punch is fixed by a hexagonal screw perpendicular to the lower punch, and the lower punch can be pulled out by loosening it.
The upper punch is fixed by a fastening nut, and the upper punch can be pulled out by loosening it.
2023-01-10
Contact Us
Address: Building 6, No. 559, Dongzhou Road, Dongjing Town, Songjiang District, Shanghai
Tel: 86 21-57740568
Fax: 021-57740568
E-mail：cabbo@tianhepm.com
Social Media
©2020-2024 ShangHai Tian He Machinery Equipment co.,Ltd Powered by www.300.cn SEO Privacy Policy